Watch our installation video to follow the fitting process. The Faybrook wall panelling kit consists of moulded rails and stiles that come in loose components, this open backed kit uses the wall as the panel and when painted in the same colour looks as if the whole wall is panelled, if the wall surface was very rough you could place a mdf sheet on the wall first and then place the kit in front but in most cases this is not needed. Each kit has 6 no. 115mm high legs to support the base rail if not using existing skirting, 4no. 1.1m x 122mm horizontal rails jointed and 6 no. 600mm high x 110mm wide premachined stiles, these pieces are all moulded and when assembled form a panel so there is no need for separate beading. The material is 12mm moisture resistant mdf, skirting board is not included, this can be placed on existing skirting also, kits are primed white and sanded. The top and bottom rails have a 45 degree chamfer, the stiles are premachined to correspond to this and fit into place, to adjust the height of the stiles on site simply lean the mitre saw over 45 degrees and cut at the required height. Top mouldings are sold separately.